I was able to flash my card in MS-DOS, but some werid problem occurred.
Ok so my weird problem is this, I clocked my mem from 1.6Ghz to ~1.9Ghz.
Did that clocking in RivaTuner, and I also did my core and shader clocking in RivaTuner.
Core from 513 to 684, and shader to 1620.
After benching and gaming everything was very stable and ok load-temp (~80.C).
I then saved backup bios from GPU-Z, and loaded that into NiBiTor 4.6 where I changed the org.clocks to my overclocked settings, also some fan-settings.
Booted into MS-DOS and flashed with nvflash. Everything went nice and then checkes specs in Nvidia-control-panel.
Everything was as I expected, all settings where now to my OC-settings.
Before I flashed I used RivaTuners "Apply oc-settings at windows startup"-box.
Now when I have flashed I though I problably wont need that anymore. So I unchecked it, then rebooted to check that everything was same.
My mem-speed was at my OC-setting (972 (1.9Ghz)) but my core was back to default (513Mhz)!
And now when I look in GPU-Z it looks like this:
Did I do something wrong at flashing? Or will the card clock itself up to "default" when running a program?
Sorry if my English is a litle bad at the moment, I'm a litle drunk from eggnog and tierd. Oh, and i'm from Sweden
And thanks for this very good site, the guides are awsome!