Vista Home Premium to 7 Home Permium Install FAILURE

iapmc424 · #1 28th October 2009, 02:57 PM

While upgrading Vista H.P. to 7 H.P. Installation Froze at completing Installation and computer rebooted after that warning message installation Failed will resume after reboot computer reboots and Viola the same warning Message!!!
I tried all I can think of but it wont come back up either on Vista or restart install and cant get it to Boot up from DVD now
Any Help out their

XJnine · #2 28th October 2009, 03:41 PM

Did you use the student version? If so, your help can be found ehre: http://www.downloadsquad.com/2009/10...udent-upgrade/

iapmc424 · #3 28th October 2009, 04:09 PM

No Upgrade DVD

Olin Coles · #4 28th October 2009, 04:13 PM

Make sure to disconnect and remove every non-essential hardware item you have in/on the computer. I've found that this can often help during the setup stage.

Olle P · #5 29th October 2009, 07:09 AM

Quote:

Originally Posted by iapmc424

... cant get it to Boot up from DVD now

Not even with the DVD reader as your primary boot drive?

I've done the opposite mistake a couple of times when installing XP; not taking the installation disk out of the reader before the rebooting.

Cheers
Olle

RagingShadow07 · #6 29th October 2009, 11:49 AM

Actually, with Windows 7, I could have swore that if it detects an installation, it won't boot from the DVD unless you press a key within the set amount of time (it'll say just that on the BIOS boot screen), so you can just walk away for a while until it's done installing.